Need help finding the right solution? Talk to a specialist
1,901 results for “HF” · Sorted by relevance
Telegaertner
M30101A0000
Mobile communication omnidirectional MIMO antenna with HH-Pol for 617 - 6000 MHz. It has 2 ports, 2x horizontal polarisation and a 0.5 m cable length.
View product
M30101A0003
Directional MIMO antenna with +/-45° polarisation and 698 - 4000 MHz frequency range. It has 2 ports, a 0.5 m cable length and IP64 rating.
View product
Telegaertner
M30101A0006
Directional MIMO mobile communication antenna with +/-45° polarisation and a 698-2700 MHz frequency range. It has 2 ports, typ. 6.5 dBi gain @1710-2700 MHz and a 0.5 m cable length.
View product
Telegaertner
B00012B0156
Dust and protective cap for a 7-16 plug. The cap is orange RAL 2004.
View product
Telegaertner
H02025A0463
Front Plate Basis V 1HU with manufacturer part number H02025A0463. It is for 10x 4.3-10 adaptor Z150.
View product
Telegaertner
B00080A0002
Black strain relief for G4, G7, G8 and G29 cable groups. Suitable cable diameter range is 2.5 mm to 3.3 mm.
View product
Telegaertner
J01026A0012
N termination load (m) with 50 Ohm impedance and 1 W maximum power. Maximum frequency is 6 GHz.
View product
Telegaertner
B00080B0002
Red strain relief for cable groups G4, G7, G8 and G29. Suitable cable diameter range is 2.5 mm to 3.3 mm.
View product
Telegaertner
B00080C0002
B00080C0002 is a blue strain relief for cable groups G4, G7, G8 and G29. It is specified for cable diameters from 2.5 mm to 3.3 mm.
View product
Telegaertner
B00080D0002
Yellow strain relief for cable groups G4, G7, G8 and G29. Cable diameter range: 2.5 mm to 3.3 mm.
View product
Telegaertner
B00080E0002
Green strain relief for cable groups G4, G7, G8 and G29. Suitable cable diameter range is 2.5 mm to 3.3 mm.
View product
Telegaertner
H01000B0177
Angle cable terminator for printed circuits for cable group G8 (RD-316). Manufacturer part number H01000B0177 with solder/crimp termination.
View product
Telegaertner
H01012A0680
Cable Clamp Crimp for cable groups G37 (2.7/7.25) and G55 (2.7/7.25 Flex). Finish: Telealloy (white bronze).
View product
Telegaertner
J01020A0039
N angle plug crimp connector for cable group G8. Suitable cable references include RD-316, G 02232 D, HF 50 0.5/1.5 LDY and K 02252 D.
View product
Telegaertner
J01020A0104
N straight plug with crimp/crimp termination. Suitable cable group is G8 (RD-316).
View product
Telegaertner
J01020A0127
Telegaertner J01020A0127 is an N straight plug with crimp/crimp termination for cable group G37 (2.7/7.25).
View product
Telegaertner
J01020B0081
N angle plug for cable group G37 (2.7/7.25). The termination is solder/crimp.
View product
Telegaertner
J01021A0155
N straight jack crimp connector with crimp/crimp termination. Specified for cable group G37 and cable 9913 Belden.
View product
Telegaertner
J01021H0004
N bulkhead jack for cable group G8 (RD-316). The connector has solder/clamp termination with a pressure sleeve and an IP67 rating.
View product
Telegärtner
J01026A0006
Telegärtner TestLine N attenuator with 3 dB attenuation. It is type m-f and rated for 1 GHz maximum frequency and 1 W maximum power.
View product
Telegärtner
J01026A0007
Telegärtner TestLine N attenuator with 10 dB attenuation. The attenuator is rated for 1 GHz maximum frequency and 1 W maximum power.
View product
Telegärtner
J01026A0009
Telegärtner J01026A0009 is a TestLine N attenuator with 20 dB attenuation. It is rated for max. frequency 1 GHz and max. power 1 W.
View product
Telegaertner
J01026B0010
N termination load with chain, type m, 50 Ohms impedance and 2 W maximum power. It is specified for maximum frequency up to 18 GHz.
View product
Telegaertner
J01171A0191
SMC angle jack crimp connector for cable group G8 (RD-316). Manufacturer part number J01171A0191, with gold finish.
View product
Engineering support
Two connectors can carry the same rating and behave differently in your machine. Interference, sealing, routing, mechanical stress, temperature and how the connection is assembled all decide whether the choice holds — and none of them are on a datasheet.
You get a named contact rather than a ticket.
What decides the choice
