Need help finding the right solution? Talk to a specialist
1,852 results for “RF” · Sorted by relevance
Telegaertner
M30101A0000
Mobile communication omnidirectional MIMO antenna with HH-Pol for 617 - 6000 MHz. It has 2 ports, 2x horizontal polarisation and a 0.5 m cable length.
View product
M30101A0003
Directional MIMO antenna with +/-45° polarisation and 698 - 4000 MHz frequency range. It has 2 ports, a 0.5 m cable length and IP64 rating.
View product
Telegaertner
M30101A0006
Directional MIMO mobile communication antenna with +/-45° polarisation and a 698-2700 MHz frequency range. It has 2 ports, typ. 6.5 dBi gain @1710-2700 MHz and a 0.5 m cable length.
View product
Telegaertner
B00012B0156
Dust and protective cap for a 7-16 plug. The cap is orange RAL 2004.
View product
Telegaertner
H02025A0463
Front Plate Basis V 1HU with manufacturer part number H02025A0463. It is for 10x 4.3-10 adaptor Z150.
View product
Telegaertner
J01026A0012
N termination load (m) with 50 Ohm impedance and 1 W maximum power. Maximum frequency is 6 GHz.
View product
Telegaertner
H01012A0680
Cable Clamp Crimp for cable groups G37 (2.7/7.25) and G55 (2.7/7.25 Flex). Finish: Telealloy (white bronze).
View product
Telegaertner
J01020A0127
Telegaertner J01020A0127 is an N straight plug with crimp/crimp termination for cable group G37 (2.7/7.25).
View product
Telegaertner
J01020B0081
N angle plug for cable group G37 (2.7/7.25). The termination is solder/crimp.
View product
Telegaertner
J01021A0155
N straight jack crimp connector with crimp/crimp termination. Specified for cable group G37 and cable 9913 Belden.
View product
Telegärtner
J01026A0006
Telegärtner TestLine N attenuator with 3 dB attenuation. It is type m-f and rated for 1 GHz maximum frequency and 1 W maximum power.
View product
Telegärtner
J01026A0007
Telegärtner TestLine N attenuator with 10 dB attenuation. The attenuator is rated for 1 GHz maximum frequency and 1 W maximum power.
View product
Telegärtner
J01026A0009
Telegärtner J01026A0009 is a TestLine N attenuator with 20 dB attenuation. It is rated for max. frequency 1 GHz and max. power 1 W.
View product
Telegaertner
J01026B0010
N termination load with chain, type m, 50 Ohms impedance and 2 W maximum power. It is specified for maximum frequency up to 18 GHz.
View product
Telegaertner
J01176A0001
SMC termination load with 50 Ohms impedance, maximum frequency of 6 GHz and maximum power of 1 W. The finish is gold.
View product
Telegaertner
J01020A0149
Telegaertner J01020A0149 is an N straight plug with solder/clamp termination and IP67 rating. It includes a pressure sleeve and assembly B82.
View product
Telegaertner
J01020A0156
N straight plug with spring/clamp termination for Low Loss 400 cables. Field mount type with IP67 rating and use only for cables with solid inner conductor.
View product
Telegaertner
J01040A0012
UHF straight plug with crimp/crimp assembly. It is specified for cable groups G37 (2.7/7.25) and G55 (2.7/7.25 FLEX).
View product
Telegaertner
H01012A0057
Cable clamp / pressure sleeve H01012A0057 for cable groups G32, G37, G42, G48, RG-213/U, RG-214/U and G55. The part has IP67, assembly D11 and finish CuSnZn3, Cu2Ni5.
View product
Telegaertner
B00081E0061
Strain relief B00081E0061 for cable groups G37 (2.7/7.25), G42 (2.6/7.1), G48 (1.6/7.3) and RG-213/U. It is RAL 6010 grass green and specified for a diameter range of 10.0 mm to 10.6 mm.
View product
Telegaertner
B00080B0123
Coloured strain relief for BNC EasyGrip straight plug crimp J01002A0081. The colour is red RAL 3000.
View product
Telegaertner
B00080D0123
Coloured strain relief for BNC EasyGrip straight plug crimp J01002A0081. The colour is yellow RAL 1018.
View product
Telegaertner
B00081A0061
Telegaertner B00081A0061 is a strain relief for cable groups G37, G42, G48 and RG-213/U. It is RAL 9005 jet black and specified for a diameter min. 10.0 mm and max. 10.6 mm.
View product
Telegaertner
B00081B0061
Strain relief for cable groups G37, G42, G48 and RG-213/U. It is RAL 3000 fire red and specified with a 10.0 mm minimum and 10.6 mm maximum diameter.
View product
Engineering support
Two connectors can carry the same rating and behave differently in your machine. Interference, sealing, routing, mechanical stress, temperature and how the connection is assembled all decide whether the choice holds — and none of them are on a datasheet.
You get a named contact rather than a ticket.
What decides the choice
