Need help finding the right solution? Talk to a specialist
17 results for “J01006A” · Sorted by relevance
Telegärtner
J01006A0837
BNC attenuator with m-f type, 50 OHM impedance and 20 dB attenuation. Rated for 0.5 W maximum power and 1 GHz maximum frequency.
View product
Telegaertner
J01006A1268
BNC termination plug with 1% tolerance. Manufacturer part number J01006A1268.
View product
Telegaertner
J01006A1269
BNC termination plug with 1% tolerance. Manufacturer part number J01006A1269.
View product
Telegaertner
J01006A0001
Telegaertner J01006A0001 is a BNC termination plug for 0.1% Video RGB with a green indicator. It is specified at 0.5 W and 100 MHz.
View product
Telegartner
BNC termination plug from Telegartner with manufacturer part number J01006A0004. The stated impedance is 50 OHM.
View product
Telegaertner
J01006A0013
BNC through termination, m-f type, with 50 Ohm impedance. It is rated 0.5 W and has a maximum frequency of 500 MHz.
View product
Telegartner
Telegartner J01006A0014 is a BNC through terminator. It has an m-f configuration and a 0.5 W rating.
View product
Telegärtner
J01006A0834
BNC attenuator, m-f type, for weakening RF signals. Rated for 3 dB attenuation, 50 OHM impedance, 1 GHz maximum frequency and 0.5 W maximum power.
View product
Telegärtner
J01006A0835
BNC attenuator with m-f type, 50 OHM impedance, 1 GHz maximum frequency and 0.5 W maximum power.
View product
Telegärtner
J01006A0836
BNC attenuator with m-f type, 10 dB attenuation and 50 Ohm impedance. Rated for 0.5 W maximum power and 1 GHz maximum frequency.
View product
Telegaertner
J01006A1373
BNC termination plug with manufacturer part number J01006A1373. Technical information states 0.5 W, 100 MHz and ? 20 dB.
View product
Telegaertner
J01006A0020
BNC termination load (m) with 50 Ohm impedance. It has a maximum frequency of 4 GHz and maximum power of 1 W.
View product
Telegartner
Telegartner J01006A0021 is a BNC jack with 2% stated in the product description.
View product
Telegärtner
J01006A0022
Telegärtner TestLine BNC attenuator with m-f type, 3 dB attenuation and 50 Ohm impedance. It is used to weaken RF signals up to 6 GHz.
View product
Telegärtner
J01006A0023
BNC attenuator with m-f type, 6 dB attenuation and 50 OHM impedance. Maximum frequency is 6 GHz.
View product
Telegärtner
J01006A0024
BNC m-f attenuator for weakening RF signals. It has 10 dB attenuation, 50 OHM impedance and a maximum frequency of 6 GHz.
View product
Telegärtner
J01006A0025
BNC attenuator with m-f type, 50 OHM impedance and 20 dB attenuation. It is specified for use up to 6 GHz.
View product
Engineering support
Two connectors can carry the same rating and behave differently in your machine. Interference, sealing, routing, mechanical stress, temperature and how the connection is assembled all decide whether the choice holds — and none of them are on a datasheet.
You get a named contact rather than a ticket.
What decides the choice
