Need help finding the right solution? Talk to a specialist
11,453 products
Telegartner
Telegartner J01390A0005 is an SMP PCB receptacle for SMT and edge-mount installation. It has a limited detent design.
View product
Telegaertner
J01391A0021
SMP angle cable jack for G7 (RG-316/U). The connection method is solder/crimp and the maximum frequency is 6 GHz.
View product
Telegartner
Telegartner J01420A0035 is a QLS angled cable plug. It is specified with CR TA G7 and RG-316/U.
View product
Telegartner
Telegartner J01421A0055 is a QLS cable bulkhead jack. The article is designated LT TA G10 and is specified for UT-141.
View product
Telegaertner
J01440A0009
4.3-10 combination plug, screw type, with Ag/Telealloy (white bronze) finish. IP67 applies only in combination with a IP67-cable clamp.
View product
Telegaertner
J01440A3005
4.3-10 straight plug with Push Pull Type interface, clamp/clamp termination and SIMFix Pro. Suitable for G23 (1/2" Flex) cable group and rated IP68.
View product
Telegartner
Telegartner J01440C2001 is a coaxial connector with a 4.3-10 angle plug interface. It is specified as 50 Ohm with hand screw and G10 (UT-141).
View product
Telegaertner
J01441A0010
SIMFix Pro 4.3-10 straight jack RF connector with clamp/clamp assembly for G23 (1/2" Flex) cable group. It has IP68 and a temperature range from -40° C up to +85° C.
View product
Telegartner
Telegartner J01442A0003 is a coaxial 4.3-10 panel adaptor with f-f configuration.
View product
Telegartner
Telegartner J01700A0007S is an FME plug for RG-174/U, RG-188A/U and RG-316/U cable.
View product
Telegaertner
J02022A0054
MPD12-H K Cat.6A mini distributor with 12 RJ45 jacks. The unit is unshielded, without cover and light grey RAL 7035.
View product
Telegaertner
J02023A0039
19" Frontplate 1 HU with 24 AMJ-S Modules Cat.6A (ISO/IEC) T568A. Supplied with cable strain relief and bonding kit in light grey RAL 7035.
View product
Telegaertner
J02023L0014
19" ISDN/Tel. patch panel MPPI25-H with 25xRJ45 unshielded connections and no wire management. The unit is a 1 HU rack mount panel with IDC (LSA-Plus) wire termination.
View product
Telegartner
Telegartner J08010A0057 is an ST connector for PCF 200/230 with a metal ferrule. It is specified for cable assembly with 2mm max.
View product
Telegaertner
J08070A0033
LC duplex connector for multimode fibre. The connector has a ceramic construction detail and an aqua housing colour.
View product
Telegaertner
J08071A0020
J08071A0020 is an LC Quad adaptor for multimode connections with ceramic sleeves and a plastic housing. It has aqua housing colour and snap-in or screw mounting.
View product
J08080A0043
SC connector for multimode fiber with ceramic construction. The connector is specified for fiber types G50/125 and G62.5/125 with a beige housing.
View product
Telegartner
Telegartner J08080B0023 is an SC duplex plug in beige. It is specified as MM with ceramic and Ø 2.0 cable termination.
View product
Telegartner
Telegartner J08081A0036 is an SC adaptor with MM specification. It has a ceramic sleeve, plastic housing and black housing color.
View product
Telegartner
ST/SC duplex adaptor for MM. It has a phosphorbronze sleeve and black housing.
View product
Telegaertner
J60020A0000
Telegaertner J60020A0000 is a TOC Bulkhead Set IP68 with AMJ-S Module Cat.6A (ISO/IEC) T568B. The set is brass, nickel-plated.
View product
Telegaertner
J68070A0007
TOC plug set with IP68 rating and MPO/MTP® female APC singlemode interface. It accepts a single cable diameter of 3.0 mm and a cable outer diameter of 4 - 9.5 mm.
View product
Telegaertner
J80020A0004
STX V4 bulkhead set with RJ45 jack A Cat.6A. It has IP67 protection class and is Variant 4 according to IEC 61076-3-106.
View product
J80020A0122
STX M12x1 connector, 8 pole, X-coded and straight. It has quad screen connection, THR solder connection, 12.7 mm gap to PCB and front mounting.
View product
Engineering support
Two connectors can carry the same rating and behave differently in your machine. Interference, sealing, routing, mechanical stress, temperature and how the connection is assembled all decide whether the choice holds — and none of them are on a datasheet.
You get a named contact rather than a ticket.
What decides the choice
